| Home | About | Coming Soon | Specials | Catalog | Dealers | Links |
Garrison Aerodrome On-Line Catalog
| Kits | Motors and Props | Radio Gear | Speed Controls |
| Electrical | Batteries & Equipment | Accessories | Ordering |
Kits by Garrison Aerodrome
| Push-E Cat | Positron | Manx | Hot Cat |
| Cabin Foamie | Hand Cat | Terminator |
The Push-E Cat EPP Electric Trainer |
||
| GAK001 |
Push-E Cat $73.99 |
The Push-E Cat V2 is a Speed 400 EPP Sport/Trainer designed for beginners and for relaxed small field flying. The model utilizes EPP foam for its wings and fuselage, and corrugated plastic for its tail surfaces. Recommended KR-1400AE battery packs provide 10+ minute flights. Pusher prop configuration protects motor and speed control, while presenting only a soft foam nose to impact. Receiver and servos are located behind the battery pack so that in crashes, nothing tries to smash the expensive bits. Kit includes all wing panels, fuselage, tail group, wood parts, hardware, and fully illustrated instructions.
Customer must supply the following in addition to the kit:
More information is available on the Push-E Cat home page. |
|
|
for Push-E Cat $145.00 |
This accessory pack contains the following critical items for completing your
Push-E Cat: |
|
|
Complete Kit $330.00 |
This is the kit for those who are starting from scratch.
This package includes:
|
|
|
for Push-E Cat $10 |
This extension wire goes from the battery pack bay up to the junction cut out under the wing. It connects battery power to the speed control. Also required for the Push-E Cat is a servo aileron extension wire to connect the speed control to the receiver. |
|
|
EPP Parts Kit $45 |
This parts kit is offered to people interested in building the Push-E Cat from the E-Zone plans set but who do not have access to foam cutting equipment. Includes EPP wing panels and EPP fuselage only. |
The Positron Speed 400 Sport Delta |
||
| GAK032 |
 Positron $29.95 |
|
| GAK041 |
Accessory Kit for Positron/Manx $156 |
This accessory pack includes the power system gear and servos you need to finish off your Positron or Manx. System is supplied ready to plug together and use with Anderson Power Pole connectors already installed. The set includes: |
The Manx EPP Speed 400 Flying Wing |
||
| GAK040 |
 Manx Flying Wing $54.95 |
The Manx is a plank style flying wing for S400 size motors contructed of EPP foam. The Manx is a fast, groovy flyer that is a lot of fun to fly. Its small size makes it easy to take with you where ever you go. Its durable EPP construction allows you to fly on fields that would be unthinkable for balsa planes to use. Kit includes wing cores, wood stock, fuselage, corrugated plastic components, motor mount and screws, and a complete hardware package. Requires tools, glues, covering, mixing capable radio, motor equipment, battery and speed control for completion.
Winspan: 36 inches |
| GAK041 |
Accessory Kit for Positron/Manx $156 |
This accessory pack includes the power system gear and servos you need to finish off your Positron or Manx. System is supplied ready to plug together and use with Anderson Power Pole connectors already installed. The set includes: |
The Hot Cat EPP Speed 400 Aerobat |
||
| GAK042 |
 Hot Cat Aerobat $59.95 |
The Hot Cat is a fast, maneuverable EPP sport flyer. It is very nimble and responsive, and is capable of a variety of aileron/elevator aerobatics on standard speed 400 power. The Hot Cat shares its wing and nose with its brother the Manx, but its conventional T-tail removes the Manx's requirement for elevon mixing. Kit includes wing cores, wood stock, fuselage, corrugated plastic components, motor mount and screws, and a complete hardware package. Requires tools, glues, covering, radio, motor equipment, battery and speed control for completion.
Winspan: 36 inches |
| GAK043 |
Accessory Kit for Hot Cat $176 |
This accessory pack includes the power system gear and servos you need to finish off your Hot Cat. System is supplied ready to plug together and use with Anderson Power Pole connectors already installed. The set includes: |
Cabin Foamie |
||
| GAK044 |
 Cabin Foamie Coming Soon |
The Cabin Foamie is a nimble 4 channel model for speed 400 power. The plane can be built as either a 4 channel plane with ailerons or as a three channel plane with rudder, elevator and throttle. The Cabin Foamie is well behaved, but very maneuverable. Combined with its EPP Construction, this makes for a very enjoyable and worry free small field flyer. |
Hand Cat HLG |
||
| GAK046 |
Hand Cat EPP HLG Coming Soon |
The Hand Cat is an HLG designed for everyday flying and may just be the
ultimate plane for hand launch golf contests. Its robust EPP primary
construction allows it to be flown everyday in locations where a pilot might
fear to launch a high dollar ship. Meanwhile, its light 10 to 11 ounce weight
and wing with a modified Selig airfoil and beefy spar matrix allow it to
launch and hang respectably with other higher dollar models.
The Hand cat features easy access to servos and radio gear via an attached canopy in case repair or replacement is required. Material for either a V-tail or a standard tail is included in the kit. |
Terminator Project Support |
||
| GAK037 |
Terminator Wing Core Set $24.95 |
This core set supports the Terminator HLG (hand launch glider) project
documented on the Charles River R/C club's web page. This core set is for use
with 1/32" balsa sheeting. The core set includes two tip cores, one main core,
and a reference plan sheet showing the tip core taper relative to the
sheeting and an optional means of finishing the wing tips. Also included on
plans are some hints and tips for sheeting the wing.
Wing cores are available in white expanded (bead) or blue extruded styrofoam. |
| GAC014 |
Carbon Fiber Arrowshaft $2.50 |
Carbon fiber arrowshaft for use as tail boom on Terminator glider. |
| GAC015 |
1/32"x3"x36" balsa sheeting $0.45 each |
Wing sheeting material for Terminator. Twelve are required, but order a few more so you can pick and choose grain. |
| GAC017 |
3/32"x3"x36" balsa sheeting $0.56 each |
Wood for tail and fuselage for Terminator. Two sheets required. |
| GAC016 |
0.007"x1"x48" Iron-on Carbon Fiber $7.50 each |
Use to reinforce the trailing edge of the Terminator wing. Two required for project. |
Problems with the function of this web site? Please contact:
Copyright © 1999, 2000, Garrison Aerodrome R/C Model Enterprises, All Rights Reserved 